Issue with running more than 4 sticks of ram.

Posts

Ellu there

I'm having issues and I don't want to buy another mobo again.
Firstly, I'm having issues posting with 4 sticks of ram installed. There Nanya DDR2 2gb ram sticks and I have 4 of them. And it all worked without issue even after OC my pc. But when I noticed that my cpu was reaching 100c on a small oc (went from 3GHz to 3.6GHz) I decided on swapping my cooler from the stock cooler to my evo 212 and once I finished mounting it and turned it on, it didn't post. But when I have a single stick of ram closest to the cpu it posts. When I have 2 sticks of ram closest to the cpu it posts but when ever I have ram sticks in the other two slots it doesn't post. I can't find anyone else with this issue. And when I purchased this mobo it was New In Box. Help?

My specks are

CPU: Core 2 Q9650
MOBO: ASUS P5K Pro
Ram: (4) Nanya DDR2 800MHz
PSU: EVGA 500w
GFX: GTX 660 Zotac

Ah, LGA775, that takes me back. So we know that two of your sticks of RAM will post. When you're filling the other slots, are you doing so with the same two sticks, or are you using the other two?

All sticks of ram work just only in the first two slots cloest to the cpu. I was finding different articals saying I might need to increase the voltage to the ram but I'm unsure if that would help. It shows 1.8v on each dimm slot on the mobo.

 Loading Image

Biggest_Mike wrote

All sticks of ram work just only in the first two slots cloest to the cpu. I was finding different articals saying I might need to increase the voltage to the ram but I'm unsure if that would help. It shows 1.8v on each dimm slot on the mobo.

-snip-

The first thing I would try it to revert everything back to stock, and see if it POSTs then. If it doesn't, reset the CMOS and try again. If it still doesn't, then it's possible that the CPU or motherboard got somehow damaged.

I have tried that and with this mobo there isn't a battery (which I found weird) so I used the CLS_CMOS jumper and it reset all the settings but to no avail. But when I get home I'm going to attempt to rase the volage on the ram and see where that takes me.

Biggest_Mike wrote

I have tried that and with this mobo there isn't a battery (which I found weird) so I used the CLS_CMOS jumper and it reset all the settings but to no avail. But when I get home I'm going to attempt to rase the volage on the ram and see where that takes me.

Hmm, I can't really imagine that raising the RAM voltage would help, but it's worth a try, I guess.

ISSUE SOLVED!

I'm not going to go as far as to say the EVO 212 cooler was the issue but... I'm going to say the EVO 212 cooler was the issue I couldn't run more then 4 sticks of ram..... I'm honestly too tired to crop it. And with that GOODNIGHT!

 Loading Image

Biggest_Mike wrote

ISSUE SOLVED!

I'm not going to go as far as to say the EVO 212 cooler was the issue but... I'm going to say the EVO 212 cooler was the issue I couldn't run more then 4 sticks of ram..... I'm honestly too tired to crop it. And with that GOODNIGHT!

-snip-

I honestly don't even understand how this is possible...

malmon wrote
Biggest_Mike wrote

ISSUE SOLVED!

I'm not going to go as far as to say the EVO 212 cooler was the issue but... I'm going to say the EVO 212 cooler was the issue I couldn't run more then 4 sticks of ram..... I'm honestly too tired to crop it. And with that GOODNIGHT!

-snip-

I honestly don't even understand how this is possible...

I can't either... But it was the only change.